Safety - micro® scooters have large 120mm diameter wheels on the front – this a safety requirement under European law. In fact all the kick scooters you see sold in Australia with the smaller 100mm wheels on the front would be illegal in Europe.
Spare Parts - only micro® scooters have a full range of replacement parts and accessories. Most of our parts are screwed together, as opposed to fused, making them easier to replace.
All our wheels are made of premium polyurethane, ShoreA. The quality is the best available and you can feel it when you ride a micro® scooter – the feeling just isn't comparable. To see the difference take a ride, or you can just drop the wheel and see what happens; no other rebound like micro® wheels!
The rubber plugs at the end of the handle bars protect against injuries from burred edges that develop without the plugs. They also guarantee a longer life for your scooter because when the scooter falls it is the plugs, not your scooter, that hits the floor, protecting and preserving your scooter for the purpose for which it was intended.
This small plastic insert between the aluminium tubes may not seem important, but it makes all the difference. By keeping a space between the tubes, it makes for smoother gliding and in colder weather, and stops the two aluminium parts from corroding and freezing together.
All micro® scooters have ABEC5 bearings as a standard feature. These high-quality bearings guarantee a noiseless ride, and also withstand higher pressures.
The brass multi-mount clips allow quick and easy securing of the handlebars to the T-tube after transportation.
The handgrips are made from non-poisonous components. This point of safety is unique and it eliminates the threat of dangerous toxins in the event of a child putting the handle bar in their mouth, or even swallowing a piece of it.
Quality - micro® uses the highest quality materials, which makes all the difference...
All our wheels are made of premium polyurethane, ShoreA. The quality is the best available and you can feel it when you ride a micro® scooter – the feeling just isn't comparable. To see the difference take a ride, or you can just drop the wheel and see what happens; no other rebound like micro® wheels!The rubber plugs at the end of the handle bars protect against injuries from burred edges that develop without the plugs. They also guarantee a longer life for your scooter because when the scooter falls it is the plugs, not your scooter, that hits the floor, protecting and preserving your scooter for the purpose for which it was intended.This small plastic insert between the aluminium tubes may not seem important, but it makes all the difference. By keeping a space between the tubes, it makes for smoother gliding and in colder weather, and stops the two aluminium parts from corroding and freezing together.
All micro® scooters have ABEC5 bearings as a standard feature. These high-quality bearings guarantee a noiseless ride, and also withstand higher pressures.The double folding mechanism is very easy to use and it assures the highest safety possible, with no room for fingers to get caught.
The brass multi-mount clips allow quick and easy securing of the handlebars to the T-tube after transportation.The handgrips are made from non-poisonous components. This point of safety is unique and it eliminates the threat of dangerous toxins in the event of a child putting the handle bar in their mouth, or even swallowing a piece of it.
Our products have a serial number at the front which helps us to locate a scooter if there were ever a problem with the manufacturing process – so we can easily find all scooters concerned.
1 comments:
well done.
cheers
Pascal
Post a Comment